Alcohol Water Mixtures
13.11.2026
Why are alcohol and water disinfectants unusual?
- When alcohols (such as ethanol or isopropyl alcohol) are mixed with water, the final volume is always slightly less than the two volumes added together.
- For example: 700ml of ethanol + 300ml of water, does not equal 1000ml once mixed.
- This is a normal and well understood physical effect called negative excess volume.
- This occurs because alcohol and water molecules attract each other very strongly when mixed.
- As a result, the molecules pack together more tightly than they do when separate, causing the mixture to shrink slightly in volume.
Why is this important?
- Micronclean’s alcohol disinfectants are labelled as 70% v/v (volume/volume).
- This means that the 70% alcohol and 30% water are measured by volume and not by weight (some regulations may ask for %w/w, even though this is not as accurate).
- Because of the ‘negative excess volume effect’, a 70% alcohol solution by volume is not the same as 70% by weight, and a simple density calculation cannot be used to correctly calculate the %w/w.
What are the alcohol contents?
|
|
%v/v |
%w/w |
|
Isopropyl alcohol in IPA |
70 |
62.76 |
|
Denatured ethanol in IMS |
70 |
62.4* |
|
Ethanol in IMS |
66.5 |
59.3* |
(only correct at 20oC); *approximate
Key Points
- Alcohol disinfectant labels and specifications are correct when stated as 70% v/v.
- Weight percentages will always appear lower, due to density differences and negative excess volume, as described above.
- This does not affect disinfectant performance.
- This behaviour is standard across the cleanroom industry.
- A 70% v/v alcohol disinfectant contains the correct amount of alcohol for effective, optimal disinfection.
- Differences between volume and weight based percentages are a normal physical property of alcohol water mixtures and are not a quality issue.
TKN01: Alcohol Water Mixtures by Tasmin Crompton - Technical Lead